Batson Enterprises™ – Rainshadow® and Forecast®
Limited Lifetime Warranty and Service Policy (USA/CANADA)
Batson Enterprises™ – Rainshadow® and Forecast®
Limited Lifetime Warranty and Service Policy All Rainshadow® and
Forecast® rod blanks are individually manufactured and inspected
with the utmost care. However, should failure occur due to defects in
materials or workmanship (to be determined by Batson Enterprises™),
the rod blank or section of the rod
blank would be replaced (to be determined by Batson Enterprises™)
at no charge. Batson Enterprises™ will not warranty blanks designed
as Fly rods that are used as casting or spinning rods.
The consumer must make all warranty claims directly to Batson Enterprises™.
Rainshadow® /Forecast® dealers or distributors are not authorized
to perform warranty service for Batson Enterprises™. Any repair
work done outside the Batson Enterprises’™ facility will
void your warranty. All blanks should be properly packaged and insured
when returning for warranty.
A COPY OF THE PURCHASE RECEIPT, YOUR WARRANTY CARD AND A CHECK OR MONEY
ORDER FOR $20.00 SHIPPING AND HANDLING COSTS MUST ACCOMPANY ALL WARRANTY
CLAIMS. If the return shipping length is over 9’ and/or the destination
is other than the United States or Canada, actual return shipping costs
will be assessed. Please include your name and contact information should
we need to contact you.
Please ship all claims to:
Batson Enterprises-Rainshadow®/Forecast®
Attn: Warranty Department
130 Harrison Rd. Suite #8
Sequim, WA 98382
E-mail:
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
1-877-875-2381 Ask for Warranty Department
Rainshadow®/Forecast® blanks that have been damaged by misuse,
accident or normal wear are not covered under this warranty. Rainshadow®/Forecast®
blanks not covered under warranty may also be replaced at a reasonable
charge. Batson Enterprises™ will advise you of the cost of replacement
and wait for approval before proceeding. Please remove all components
that you want to retain before sending the rod back for warranty claim.
If it is a multi-piece rod, remove components from the broken section
only. Please send the entire rod, if multi-piece, so that we can properly
fit the new section. Batson Enterprises™ is not responsible for
guides, cork, reel seats or any other items attached to the blank. OUR
WARRANTY COVERS THE BLANK ONLY. This warranty is limited to the blank
and does not cover direct, indirect, consequential, incidental or any
other type of damage resulting from the use of the blank. Some states
do not allow the exclusion or limitation of incidental or consequential
damages so the above imitations may not apply to you. This warranty
gives you specific legal rights; you may also have other rights that
vary from state to state.
All Rainshadow® and Forecast® rod blanks are individually manufactured
and inspected with the utmost care. However, should failure occur due
to defects in materials or workmanship (to be determined by Batson Enterprises™),
the rod blank or section of the rod blank would be replaced (to be determined
by Batson Enterprises™) for the actual shipping cost to return it
to the sender. Batson Enterprises™ will not warranty blanks designed
as Fly rods that are used as casting or spinning rods.
The consumer must make all warranty claims directly to Batson Enterprises™.
Rainshadow® /Forecast® dealers or distributors are not authorized
to perform warranty service for Batson Enterprises™. Any repair
work done outside the Batson Enterprises’™ facility will void
your
warranty. All blanks should be properly packaged and insured when returning
for warranty.
A COPY OF THE PURCHASE RECEIPT AND YOUR WARRANTY CARD MUST ACCOMPANY ALL
WARRANTY CLAIMS. Please include your name and contact information so we
can contact you regarding the cost of return shipment.
Due to the high cost of shipping, please cut 6” off of each side
of the broken blank, remove all components you want to retain, and return
to:
Please ship all claims to:
Batson Enterprises-Rainshadow®/Forecast®
Attn: Warranty Department
130 Harrison Rd. Suite #8
Sequim, WA 98382
E-mail:
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
1-877-875-2381 Ask for Warranty Department
Rainshadow®/Forecast® blanks that have been damaged by misuse,
accident or normal wear are not covered under this warranty. Rainshadow®/Forecast®
blanks not covered under warranty may also be replaced at a reasonable
charge. Batson Enterprises™ will advise you of the cost of replacement
and wait for approval before proceeding. Please remove all components
that you want to retain before sending the rod back for warranty claim.
.
Batson Enterprises™ is not responsible for guides, cork, reel seats
or any other items attached to the blank. OUR WARRANTY COVERS THE BLANK
ONLY.
This warranty is limited to the blank and does not cover direct, indirect,
consequential, incidental or any other type of damage resulting from the
use of the blank.
|
Warranty 
